Timber Doors

Guide · Homeowners · 3 min read · Updated 17 November 2026

Timber vs Composite Front Doors: Which Is Better for Your Home?

Short answer

Choose timber if you want an authentic period look, a door made to any size or design, and one that can be repaired and refinished for decades. Choose composite if you want low maintenance and a standard-sized door at a lower price. Both can meet modern security and thermal standards. Timber needs refinishing every few years outside, while composite mainly needs cleaning and occasional hinge and lock adjustment.

Timber vs Composite Front Doors: Which Is Better for Your Home?

What each door is made of

A timber door is made from solid or engineered wood. Engineered timber uses laminated layers glued together with the grain alternating, which makes the door far more stable than a single solid board and less likely to twist or warp. Common external timbers include oak, sapele, iroko, redwood and Accoya, an acetylated wood treated to resist rot and movement.

A composite door has a glass-reinforced plastic skin over an insulating foam core, usually around a timber or plastic subframe. The skin is moulded with a grain texture and a fixed colour. Composite doors are made in standard size ranges from a factory catalogue, then cut down within limits to fit your opening.

Side-by-side comparison

The table compares the two on the points homeowners usually care about. Prices are for a full door set supplied and fitted.

FactorTimber doorComposite door
Typical fitted price£1,600–£3,200; bespoke from £2,800Generally lower for standard sizes
AppearanceReal grain, true mouldings, any designMoulded grain, catalogue styles
Sizes and shapesMade to measure, arches and fanlightsStandard ranges, limited cutting down
MaintenanceRefinish every few years outsideClean, lubricate and adjust
RepairabilitySplice, resin repair, re-hang, refinishSkin damage often means replacement
Colour changeRepaint any timeLimited without specialist coatings
Listed buildingsUsually the accepted choiceOften refused consent

Security and insulation

Both types can be very secure. Security depends far more on the lock, cylinder, hinges and frame fixings than on what the leaf is made of. Look for a multipoint lock, an anti-snap cylinder and a door set tested to PAS 24, the security standard Approved Document Q requires for doors in new homes in England. Many timber door makers now offer PAS 24 tested sets.

On insulation, composite doors are naturally good because of their foam core. Timber doors can match them when built with an insulated core or engineered construction and fitted with good seals and double glazing. In England, a replacement external door set should meet the 1.4 W/m²K limit in Approved Document L, so ask your supplier for the figure.

Maintenance and lifespan

Timber is the higher-maintenance option, but it is also the one you can keep repairing. A well-made, properly finished hardwood door on a sheltered elevation can last for generations. South and west facing doors take more sun and rain, so expect to sand and recoat more often. Small areas of rot at the bottom rail can be cut out and spliced, and a tired door can be stripped and refinished to look new.

Composite doors need very little upkeep day to day. Over time the skin can fade in strong sun and the door can drop or bow slightly, which is usually fixed by adjusting the hinges and keeps. Deep scratches or cracks in the skin are hard to repair invisibly.

  • Check timber finishes every year, especially the bottom rail and glazing beads
  • Recoat microporous stains or paints before they wear through to bare wood
  • Keep door seals clean and replace them when they flatten
  • Lubricate multipoint locks and hinges once or twice a year
  • Keep gutters and drips clear so water does not run down the door

Which should you choose?

Timber is the stronger choice for Victorian, Edwardian, Georgian and cottage homes, for listed buildings and conservation areas, for unusual openings, and for anyone who wants a door that can be repainted, repaired and kept for a very long time. It is also the natural choice where the original frame and mouldings are worth keeping, because a new leaf can be made to suit them.

Composite suits newer homes with standard openings, owners who want minimal maintenance, and tighter budgets. If you are unsure, ask a joiner to look at the opening and the property style. In conservation areas and on listed buildings, check with the council before ordering anything, because a uPVC or composite door may not be acceptable.

Cost over the life of the door

Comparing the fitted price alone can be misleading. A composite door is usually cheaper on day one, and it needs little spent on it for many years. A timber door costs more upfront and needs periodic refinishing, either as a weekend job or a professional visit. Over a long period, though, a timber door that is maintained properly rarely needs replacing outright, because damage can be repaired and the finish renewed.

Think too about how long you plan to stay and what the house needs. On a period terrace, a well-made timber door suits the architecture and many buyers notice the difference. On a modern estate, a composite door that matches the neighbours may be the more sensible spend. Whichever you choose, the quality of fitting matters more than most people expect. A good door hung badly in a twisted or poorly fixed frame will drop, leak and stick, while a carefully fitted door will open smoothly and seal tightly for years. Ask how the frame will be fixed, packed and sealed to the wall.

Questions people also ask

Do timber doors warp?

Poorly made solid timber doors can warp, especially if they are not sealed on all edges. Engineered timber, good joinery and a complete finish on the top and bottom edges greatly reduce movement. Acetylated wood is particularly stable. Most sticking problems come from swollen, unsealed edges or dropped hinges and can be put right.

Are composite doors allowed in conservation areas?

Sometimes, but not always. Many conservation areas have an Article 4 direction that removes permitted development rights for changing front doors, and listed buildings normally need consent. Councils often expect a timber door in a traditional style. Check with your local planning team before ordering a replacement.

Which lasts longer, timber or composite?

A well-maintained hardwood door can outlast a composite one because it can be repaired and refinished many times. A neglected timber door, however, can rot within a decade on an exposed elevation. Composite doors last well with little care but are usually replaced, not repaired, when the skin or core fails.

Written and checked by the Timber Doors team. Read our editorial policy.

Get a free timber doors quote

Tell us what you need and we'll come back with a clear price.

Request a quote