Timber Doors FAQs
Straight answers to the questions we're asked most.
Are timber doors better than composite doors?
Timber doors are better if you want a natural look, a door that can be repaired and refinished, and a style that suits period homes. Composite doors need less maintenance but cannot be planed, repainted easily or repaired once the skin is damaged. A well-made engineered hardwood or accoya door with a good finish can perform as well as composite for warmth and security, but it does need recoating every few years.
How long does a timber front door last?
A good hardwood or accoya front door can last 30 to 60 years if it is finished properly and recoated when needed. Softwood doors last less in exposed positions. The biggest threats are water getting into the bottom rail and end grain, and coatings left to fail. A canopy or porch, a good sill and regular refinishing make a large difference to lifespan.
Why does my wooden door stick in winter?
A timber door sticks in winter because the wood absorbs moisture and swells, especially if the edges or bottom were never sealed. Dropped hinges make it worse by tilting the door into the frame. The fix is usually to tighten or replace the hinges, plane the binding edge lightly once the door is dry, and seal every bare edge with paint or oil so it stops taking on water.
What is accoya and is it good for doors?
Accoya is softwood that has been chemically modified by acetylation, which makes it far more stable and rot resistant than untreated timber. It is very good for external doors because it swells and shrinks much less than most hardwoods, so paint lasts longer and the door keeps its fit. It costs more than standard redwood but is often comparable to quality hardwoods.
Do I need building regulations approval to replace a front door?
Replacing a front door in England counts as controlled work, so the new door set must meet the thermal requirements of Approved Document L. This is usually shown by using an installer registered with a competent person scheme or by notifying building control. Doors in listed buildings or some conservation areas may also need planning consent before they are changed.
How long does it take to fit a timber door?
Hanging a new internal door takes one to two hours. Fitting an external door into an existing frame takes around half a day, and a full door and frame replacement usually takes a day including making good. French and bi-fold doors take one to two days. Made-to-measure doors also have a manufacturing lead time of several weeks before fitting.
Can a rotten timber door frame be repaired?
Yes, a rotten timber frame can often be repaired if the rot is limited to the foot of the posts or the sill. The joiner cuts out the decayed wood and either fills small areas with a two-part resin or splices in new timber. If rot runs high up the posts or the frame has moved badly, a full replacement frame is more reliable.
Should an oak door be oiled or varnished?
Oak doors are usually best oiled or finished with a microporous stain rather than a hard varnish. Oils and microporous finishes let moisture escape and are easy to top up, whereas varnish tends to crack and peel on external doors, trapping water underneath. Internal oak doors are commonly finished with hardwax oil, which is durable and easy to refresh.
How much gap should there be around an internal door?
An internal door should have an even gap of about 2–3mm at the top and both sides. The gap under the door depends on the floor finish, typically 8–12mm over carpet or more where airflow is needed for ventilation. Even gaps make the door look sharp and stop it binding as the timber moves through the seasons.
Are timber doors secure?
Timber doors can be very secure when they are solid or engineered hardwood with a multipoint lock, anti-snap cylinder and strong hinges fixed into a solid frame. Look for door sets tested to PAS 24, which is the standard used for new homes in England. A weak frame or poor fixings is usually the bigger risk, not the timber itself.
How often should I repaint or refinish an external timber door?
Most external timber doors need recoating every two to five years. Doors facing south or west, or exposed to driving rain, need attention sooner. Check each spring for cracking, flaking or greying, particularly on the bottom rail and edges. Recoating before the finish fails is quick; leaving it until timber is bare means stripping and sanding back.
Can you match a new door to my period house?
Yes, a joiner can make a bespoke door that copies the panel layout, mouldings, glazing and proportions of the original or of neighbouring houses on the street. They will measure the opening, photograph existing details and produce a drawing for you to approve. Old stained glass can often be reused or copied, and period-style ironmongery finishes the look.
Get a free timber doors quote
Tell us what you need and we'll come back with a clear price.
Request a quote