Timber Doors

Timber Doors

Internal Door Replacement

Supply and hanging of oak, pine, painted or veneered internal doors, including trimming, hinges, latches and handles fitted to suit existing linings.

Free Timber Doors quote

No obligation. We only use your details to reply about this job.

Internal Door Replacement — Timber Doors

What's involved

Internal doors are rarely a standard fit. Older linings are often out of square and floors are uneven, so each door is scribed and planed to give an even gap of about 2–3mm at the top and sides and enough clearance at the bottom for carpet or a threshold. Solid oak and engineered oak doors are heavy, so they need three hinges rather than two. The joiner will reuse hinge positions where possible, cut new latch and hinge recesses with a router or chisel, and seal the top and bottom edges so the door does not take on moisture. Unfinished doors should be stained, oiled or painted on all six faces within days of fitting. A good joiner can hang four to six internal doors a day. It helps to have the doors delivered a few days early so they acclimatise in the house before hanging.

How we handle it

  1. Send your details

    Use the quote form to tell us the type of door, the rough size, the property type and what is wrong or what you want. Photos of the door, frame and sill help a joiner price accurately and spot problems early.

  2. Survey and measure

    A local joiner checks the opening, the condition of the frame and sill, the floor levels and the wall construction. For made-to-measure doors they take exact measurements, because timber doors are built to the opening rather than cut down.

  3. Written quote

    You receive a clear price covering the door, frame, glazing, ironmongery, finishing and removal of the old door. Lead times are explained so you know when made-to-order items will arrive and when fitting can happen.

  4. Fitting day

    The joiner removes the old door, fits or repairs the frame, hangs the new door and installs locks and seals. They make good around the frame and check the door closes, locks and seals evenly along every edge.

  5. Finish and aftercare

    Unfinished timber is sealed promptly. You get advice on recoating intervals, hinge and lock lubrication, and how to adjust for seasonal movement, so the door keeps closing properly for years.

Price guide

Timber door prices depend mostly on the timber species, whether the door is stock or made to measure, and whether the frame is being replaced. Hardwood and accoya cost more than softwood but last far longer. Glazing, multipoint locks and factory finishing add cost but save time on site. The figures below are typical UK guide prices including standard fitting.

  • Internal timber door supplied and hung: £180–£450. Per door, depending on oak, pine or painted finish and whether linings need adjusting.
  • Door repair or overhaul: £150–£450. Rehanging, resin or splice repairs, new seals and adjustment on one door.
  • Bespoke period front door: from £2,800. Made to measure with matched mouldings and glazing, excluding major frame or fanlight work.

Questions about internal door replacement

How much gap should there be around an internal door?

An internal door should have an even gap of about 2–3mm at the top and both sides. The gap under the door depends on the floor finish, typically 8–12mm over carpet or more where airflow is needed for ventilation. Even gaps make the door look sharp and stop it binding as the timber moves through the seasons.

Get a free timber doors quote

Tell us what you need and we'll come back with a clear price.

Request a quote