Timber Doors
Refinishing, Staining and Painting
Stripping, sanding and refinishing timber doors with oils, microporous stains or paints suited to their exposure and timber species.

What's involved
Finish is what keeps a timber door working. External doors facing south or west take the most punishment from sun and rain and usually need recoating every two to five years. The decorator or joiner removes ironmongery, strips failing coatings with a heat gun or chemical stripper, sands through the grits and treats any grey or blackened timber with oxalic acid. Bare hardwood is then sealed with a penetrating oil or a microporous stain or paint system that lets moisture escape. Edges, the bottom rail and any end grain get extra coats. A typical external door refinish runs over two days to allow drying between coats, and the door may need to be taken off its hinges and propped in a garage. Internal doors are quicker, and oak doors are often finished with hardwax oil for a natural look.
How we handle it
Send your details
Use the quote form to tell us the type of door, the rough size, the property type and what is wrong or what you want. Photos of the door, frame and sill help a joiner price accurately and spot problems early.
Survey and measure
A local joiner checks the opening, the condition of the frame and sill, the floor levels and the wall construction. For made-to-measure doors they take exact measurements, because timber doors are built to the opening rather than cut down.
Written quote
You receive a clear price covering the door, frame, glazing, ironmongery, finishing and removal of the old door. Lead times are explained so you know when made-to-order items will arrive and when fitting can happen.
Fitting day
The joiner removes the old door, fits or repairs the frame, hangs the new door and installs locks and seals. They make good around the frame and check the door closes, locks and seals evenly along every edge.
Finish and aftercare
Unfinished timber is sealed promptly. You get advice on recoating intervals, hinge and lock lubrication, and how to adjust for seasonal movement, so the door keeps closing properly for years.
Price guide
Timber door prices depend mostly on the timber species, whether the door is stock or made to measure, and whether the frame is being replaced. Hardwood and accoya cost more than softwood but last far longer. Glazing, multipoint locks and factory finishing add cost but save time on site. The figures below are typical UK guide prices including standard fitting.
- External timber door and frame: £1,600–£3,200. Complete door set with sill, multipoint lock and finishing, fitted and made good.
- External hardwood door, leaf only: £900–£1,800. New leaf hung in a sound existing frame, with lock and weatherstrips fitted.
- Internal timber door supplied and hung: £180–£450. Per door, depending on oak, pine or painted finish and whether linings need adjusting.
Questions about refinishing, staining and painting
How much gap should there be around an internal door?
An internal door should have an even gap of about 2–3mm at the top and both sides. The gap under the door depends on the floor finish, typically 8–12mm over carpet or more where airflow is needed for ventilation. Even gaps make the door look sharp and stop it binding as the timber moves through the seasons.
Should an oak door be oiled or varnished?
Oak doors are usually best oiled or finished with a microporous stain rather than a hard varnish. Oils and microporous finishes let moisture escape and are easy to top up, whereas varnish tends to crack and peel on external doors, trapping water underneath. Internal oak doors are commonly finished with hardwax oil, which is durable and easy to refresh.
Can a rotten timber door frame be repaired?
Yes, a rotten timber frame can often be repaired if the rot is limited to the foot of the posts or the sill. The joiner cuts out the decayed wood and either fills small areas with a two-part resin or splices in new timber. If rot runs high up the posts or the frame has moved badly, a full replacement frame is more reliable.
Other services
External Front and Back Doors
Hardwood or engineered timber entrance doors with a new or overhauled frame, multipoint locking, weather seals and a factory or on-site finish.
Internal Door Replacement
Supply and hanging of oak, pine, painted or veneered internal doors, including trimming, hinges, latches and handles fitted to suit existing linings.
French and Bi-Fold Doors
Timber French doors and folding sliding doors made to measure, fitted with double glazing, flush thresholds and secure multipoint locking.
Bespoke and Period Doors
Made-to-order panelled, ledged and braced or glazed doors matched to Victorian, Edwardian, Georgian and cottage properties, including listed buildings.
Timber Door Repair and Overhaul
Fixing sticking, dropped, draughty or rotten timber doors and frames with resin or timber splice repairs, rehanging and new seals.
Refinishing, Staining and Painting near you
Get a free timber doors quote
Tell us what you need and we'll come back with a clear price.
Request a quote