Timber Doors

Guide · Homeowners · 3 min read · Updated 17 November 2026

Timber Door Building Regulations UK: U-Values, Security and Glass

Short answer

In England, a replacement external door in an existing home should meet a U-value of 1.4 W/m²K or better under Approved Document L. Glass in or beside doors must be safety glass under Approved Document K. New homes need doors meeting a security standard such as PAS 24 under Approved Document Q. Listed buildings normally need listed building consent for a new front door, and conservation areas may restrict changes.

Timber Door Building Regulations UK: U-Values, Security and Glass

Thermal performance: Approved Document L

When you replace an external door in an existing home in England, the new door set should meet a maximum U-value of 1.4 W/m²K. The U-value measures how much heat passes through the door, so a lower number is better. The figure applies to the whole door set, including the frame and any glass, not just the solid part of the leaf.

Timber door makers achieve this through insulated or engineered cores, double or triple-glazed panels and good seals. A traditional solid panelled door with single glazing will not meet it. Ask your supplier for the door set U-value in writing. Some exceptions can apply to historic buildings where meeting the standard would harm their character, and building control can advise on this.

Safety glazing: Approved Document K

Glass in critical locations must break safely or resist impact. For doors, that broadly means any glass in the door itself, and glass in side panels close to the door, within the zones set out in Approved Document K. In practice, almost all glass in an external timber door or a pair of French doors needs to be toughened or laminated.

This matters with period doors. Original leaded or stained panels are usually ordinary annealed glass. When making a new period door, a good joiner will either use safety glass with a decorative overlay or encapsulate decorative glass within a laminated or toughened sealed unit.

  • Toughened glass breaks into small, blunt pieces
  • Laminated glass holds together on its interlayer when broken
  • Look for the safety mark etched in a corner of each pane
  • Decorative glass can be set inside a safety-glass sealed unit

Security and fire doors

Approved Document Q requires doors in new homes in England to resist forced entry, and PAS 24 is the standard most commonly used to show this. It is not a legal requirement for a replacement door in an existing home, but it is a sensible benchmark. A PAS 24 rating applies to the door set tested as a whole, so the frame, locks, hinges and glazing all have to match the tested specification.

Internal timber doors may need to be fire doors in some situations. Under Approved Document B, a loft conversion that creates a third storey usually needs a protected stair with fire-resisting doors, and a door between an integral garage and the house should also be fire resisting. These must be certified fire doors fitted as tested.

Listed buildings and conservation areas

Changing the front door of a listed building normally requires listed building consent, even if you replace it like for like in appearance. Carrying out works without consent where it is needed is a criminal offence, so speak to the council's conservation officer first. They will often want drawings showing mouldings, glazing bars and ironmongery.

In conservation areas, an Article 4 direction can remove the permitted development rights that would normally let you change a front door. Where one applies, you will need planning permission. Timber is usually the expected material, and the design should suit the street.

Quick reference

The table summarises the main rules that apply to timber door work in England. Wales and Scotland have their own building regulations and technical standards with similar aims, so check local requirements if you live there.

Whatever the rules say on paper, the practical test is simple. Ask your joiner or supplier, before you order, which standards the door set has been tested to, what its U-value is, what glass is in it and whether any consent or notification is needed. Get the answers in writing on the quote. A reputable installer will be able to explain each point clearly and will not be vague about safety glass or building control.

Keep the paperwork once the door is fitted. A building control completion certificate or competent person scheme certificate, along with the glass and door set specifications, is useful when you come to sell. Solicitors often ask about replacement doors and windows fitted since the last sale, and missing certificates can delay a transaction or lead to indemnity insurance being needed. For listed buildings, keep the consent decision notice and approved drawings with the property deeds.

If you are unsure whether a door needs to be a fire door, for example in a loft conversion, ask building control at the planning stage rather than after the doors have been bought. Swapping a standard door for a certified fire door set later costs far more than getting it right first time.

RuleWhat it coversApplies to
Approved Document LMaximum 1.4 W/m²K for replacement external doorsExisting homes, England
Approved Document KSafety glazing in critical locationsAll glazed doors and side panels
Approved Document QSecurity standard such as PAS 24New homes, England
Approved Document BFire doors in protected routesLoft conversions, integral garages
Listed building consentChanges affecting characterListed buildings
Article 4 directionRemoves permitted development rightsSome conservation areas

Questions people also ask

Do I need building control approval to replace a front door?

Replacing an external door in England is controlled work for thermal performance. Installers registered with a competent person scheme can self-certify it. If your installer is not registered, you may need to notify building control. Fitting a new leaf into an existing frame is often treated differently, so check before work starts.

Can a traditional timber door meet the U-value?

Yes, if it is designed to. Modern timber doors can look traditional while using an engineered or insulated core, double-glazed panels and good seals. A solid single-glazed panelled door will not usually reach 1.4 W/m²K. For listed buildings, the conservation officer may accept a lower performance to protect character.

Does a back door need safety glass?

Yes. Glass in any door, front or back, falls within the critical locations in Approved Document K, so it must be toughened, laminated or otherwise safe. The same applies to French doors, glazed internal doors and side panels near doors.

Written and checked by the Timber Doors team. Read our editorial policy.

Get a free timber doors quote

Tell us what you need and we'll come back with a clear price.

Request a quote