Timber Doors

Guide · Homeowners · 4 min read · Updated 17 November 2026

How Much Does a Timber Front Door Cost in the UK? 2026 Prices

Short answer

A new hardwood front door leaf hung in a sound existing frame typically costs £900–£1,800 fitted in the UK in 2026, while a complete external timber door and frame costs £1,600–£3,200. Bespoke period front doors start from £2,800, timber French doors cost £2,200–£4,500, and internal timber doors cost £180–£450 each supplied and hung. Repairs and overhauls run £150–£450 per door.

How Much Does a Timber Front Door Cost in the UK? 2026 Prices

Typical timber door prices in 2026

Timber door prices depend mainly on whether you need a leaf only or a full door set, the timber species, the glazing and how much the opening has to be altered. A leaf-only job reuses the existing frame, so it is quicker and cheaper, but only works when the frame is sound, square and free of rot. A full door set replaces the frame and sill too, which costs more but gives a properly sealed, weathertight result.

The table shows typical guide prices supplied and fitted. They include removing the old door and basic making good around the frame, but not redecorating the hallway or replastering large areas.

JobTypical 2026 priceWhat it covers
Internal timber door supplied and hung£180–£450Oak, pine or painted door, hinges and latch
External hardwood door, leaf only£900–£1,800New leaf in sound frame, lock and seals
External timber door and frame£1,600–£3,200Full set with sill, multipoint lock, finish
Timber French doors fitted£2,200–£4,500Pair of glazed doors with frame
Bespoke period front doorfrom £2,800Made to measure, matched mouldings and glass
Door repair or overhaul£150–£450Rehang, splice repair, seals, adjustment

What pushes the price up or down

Timber species makes a real difference. Softwoods such as redwood are cheaper but need a good paint system and more frequent upkeep outside. Hardwoods such as sapele and oak cost more but are denser and more stable. Acetylated wood such as Accoya sits at the top end because it is highly stable and resists rot well, which suits exposed elevations.

Glazing adds cost, especially leaded, bevelled or stained glass in a period door. Any glass in or beside an external door must be safety glass, and double-glazed units add weight, so hinges and frames have to be specified to carry it. Ironmongery also varies widely, from a basic multipoint lock to solid brass knockers, letter plates and pull handles.

  • Full door set rather than leaf only
  • Hardwood or acetylated timber rather than softwood
  • Non-standard sizes, arched heads or fanlights
  • Decorative, leaded or double-glazed panels
  • Factory spray finish rather than on-site painting
  • Rotten openings, uneven floors or steps that need altering
  • Listed building drawings and consent support

Leaf only or full door set?

Many homeowners are offered the cheaper leaf-only option, and it can be the right call. If the frame is solid, the sill is sound and the opening is square, a skilled joiner can fit a new leaf, cut in hinges and locks, and add weatherstrips so it seals well. This works particularly well for period homes where the original frame and mouldings are worth keeping.

A full door set is the better choice when the frame is rotten at the foot, the sill is split, or the old door never sealed properly. Because the leaf and frame are made together, gaps are even, the lock keeps engage cleanly and the threshold is designed to shed water. In England a replacement external door set should also meet the thermal limit in Approved Document L, which is easier to achieve with a modern insulated set.

Internal doors and French doors

Internal doors are the cheapest timber door work but costs add up across a whole house. A typical three-bedroom home has eight to ten internal doors, so a full replacement often runs to a few thousand pounds. Older houses frequently have non-standard openings, so doors have to be trimmed or made to size, and linings may need packing or replacing. Ask whether hinges, handles and latches are included in the price per door.

Timber French doors are priced as a pair with their frame. Price depends on width, glazing specification, threshold design and finish. Doors opening onto a patio need a well-detailed sill and drip so rain does not reach the floor inside. A low threshold is possible, but the outside ground level and drainage have to be planned so water does not pool against the door.

How to get an accurate quote

Guide prices only go so far. A joiner needs to measure the opening, check the frame and sill for rot, look at the floor and step levels, and understand the style you want. Photos of the door from inside and outside, with a tape measure across the opening, help get a reliable figure quickly.

Make sure each quote states the timber species, glazing type, lock specification, finish and whether the old door is taken away. Comparing like with like is the only way to judge price. A quote that seems cheap may use softwood, a single-point lock or a basic primer coat that needs finishing by you.

Costs people forget to budget for

The door itself is only part of the bill on some jobs. When an old frame comes out, the plaster and render around it often comes away too, so a little making good inside and out is normal. Larger patches of plaster, new architrave throughout the hall, or repainting the whole hallway are usually separate. If the floor level has changed over the years because of new tiles or a thicker floor finish, the threshold may need adjusting so the door clears it.

Period homes bring their own extras. Fanlights above the door may be rotten and need rebuilding, original stone steps can be worn and uneven, and listed properties may need scaled drawings for the conservation officer before anything can be ordered. Ironmongery is another variable. A good-quality letter plate, knocker, pull handle and numerals in solid brass or black iron can add a few hundred pounds, so decide early what you want and ask for it to be itemised on the quote. Planning these details at the start avoids surprises when the door arrives.

Questions people also ask

Is a timber front door more expensive than composite?

Usually, yes. A good composite door set costs roughly the same as a leaf-only hardwood door, while a full hardwood or bespoke timber door set costs more. Timber is chosen for its look, its ability to be made to any size and style, and because it can be repaired and refinished rather than replaced when it gets tired.

How long does it take to fit a timber front door?

A leaf-only replacement is usually done in half a day to a day. A full door and frame typically takes one day, including removing the old set, fixing and sealing the new frame and making good. Bespoke doors take several weeks to make before fitting, so plan around the joinery lead time.

Do timber door prices include painting?

It depends on the supplier. Some doors arrive factory finished with a microporous stain or paint system, which is usually the most durable. Others are delivered primed only and need two or more top coats on site. Always check whether finishing is included, because it affects both price and how long the door lasts.

Written and checked by the Timber Doors team. Read our editorial policy.

Get a free timber doors quote

Tell us what you need and we'll come back with a clear price.

Request a quote