Timber Doors
Timber Door Repair and Overhaul
Fixing sticking, dropped, draughty or rotten timber doors and frames with resin or timber splice repairs, rehanging and new seals.

What's involved
Many timber doors that look finished can be saved for far less than a replacement. Typical faults are a door that has dropped on worn hinges, swollen edges that bind in wet weather, open joints at the bottom rail and wet rot in the frame foot or sill. The joiner will tighten or replace hinges, plane and reseal edges, reglue and pin loose joints, and cut out rotten sections. Small areas of rot are dug out and filled with a two-part wood resin; larger areas are spliced with new matching timber. Draughts are cured with a brush or rubber weatherstrip routed into the frame and a new threshold seal. Most overhauls take half a day to a day. The repaired areas need painting or finishing promptly, so plan to do that yourself or ask for it in the quote.
How we handle it
Send your details
Use the quote form to tell us the type of door, the rough size, the property type and what is wrong or what you want. Photos of the door, frame and sill help a joiner price accurately and spot problems early.
Survey and measure
A local joiner checks the opening, the condition of the frame and sill, the floor levels and the wall construction. For made-to-measure doors they take exact measurements, because timber doors are built to the opening rather than cut down.
Written quote
You receive a clear price covering the door, frame, glazing, ironmongery, finishing and removal of the old door. Lead times are explained so you know when made-to-order items will arrive and when fitting can happen.
Fitting day
The joiner removes the old door, fits or repairs the frame, hangs the new door and installs locks and seals. They make good around the frame and check the door closes, locks and seals evenly along every edge.
Finish and aftercare
Unfinished timber is sealed promptly. You get advice on recoating intervals, hinge and lock lubrication, and how to adjust for seasonal movement, so the door keeps closing properly for years.
Price guide
Timber door prices depend mostly on the timber species, whether the door is stock or made to measure, and whether the frame is being replaced. Hardwood and accoya cost more than softwood but last far longer. Glazing, multipoint locks and factory finishing add cost but save time on site. The figures below are typical UK guide prices including standard fitting.
- Internal timber door supplied and hung: £180–£450. Per door, depending on oak, pine or painted finish and whether linings need adjusting.
- External hardwood door, leaf only: £900–£1,800. New leaf hung in a sound existing frame, with lock and weatherstrips fitted.
- External timber door and frame: £1,600–£3,200. Complete door set with sill, multipoint lock and finishing, fitted and made good.
Questions about timber door repair and overhaul
Are timber doors better than composite doors?
Timber doors are better if you want a natural look, a door that can be repaired and refinished, and a style that suits period homes. Composite doors need less maintenance but cannot be planed, repainted easily or repaired once the skin is damaged. A well-made engineered hardwood or accoya door with a good finish can perform as well as composite for warmth and security, but it does need recoating every few years.
How long does a timber front door last?
A good hardwood or accoya front door can last 30 to 60 years if it is finished properly and recoated when needed. Softwood doors last less in exposed positions. The biggest threats are water getting into the bottom rail and end grain, and coatings left to fail. A canopy or porch, a good sill and regular refinishing make a large difference to lifespan.
How long does it take to fit a timber door?
Hanging a new internal door takes one to two hours. Fitting an external door into an existing frame takes around half a day, and a full door and frame replacement usually takes a day including making good. French and bi-fold doors take one to two days. Made-to-measure doors also have a manufacturing lead time of several weeks before fitting.
Other services
External Front and Back Doors
Hardwood or engineered timber entrance doors with a new or overhauled frame, multipoint locking, weather seals and a factory or on-site finish.
Internal Door Replacement
Supply and hanging of oak, pine, painted or veneered internal doors, including trimming, hinges, latches and handles fitted to suit existing linings.
French and Bi-Fold Doors
Timber French doors and folding sliding doors made to measure, fitted with double glazing, flush thresholds and secure multipoint locking.
Bespoke and Period Doors
Made-to-order panelled, ledged and braced or glazed doors matched to Victorian, Edwardian, Georgian and cottage properties, including listed buildings.
Refinishing, Staining and Painting
Stripping, sanding and refinishing timber doors with oils, microporous stains or paints suited to their exposure and timber species.
Timber Door Repair and Overhaul near you
Get a free timber doors quote
Tell us what you need and we'll come back with a clear price.
Request a quote